官网动态
按发布时间排序Kinetic Technologies Introduces KTS1642Q Automotive Load Switches Designed to Simplify Compliance with ISO 16750-2 and ISO 7637-2 Power Transient Standards
AEC-Q100 Qualified 6A Load Switches Operate with 4.0V Cold Crank, Protecting Automotive Electronics from -28V Reverse Battery, 35V Load Dump, Over-Vol…
08-13 19:47
Kinetic Technologies™ Introduces 5A eFuse for Reliable 5V and 12V Power-Rail Protection
Adding to their market leading protection product portfolio, KTS1630 combines low on-resistance, programmable current limiting and fast fault protecti…
08-04 17:56
Kinetic Technologies Finalizes Majority Stake Agreement with Cyient Semiconductors
Kinetic Technologies completes transaction with Cyient Semiconductors, accelerating innovation, expanding global engineering scale, and strengthening …
04-08 15:01
Kinetic Technologies Announces Elevated Tablet Panel Power IC with 12-bit Gamma 2.2 Dimming for Next Generation High-Resolution and High-Refresh Rate Displays
KTZ8869: 8-Channel 40V Backlight Using I2C and PWM 12-bit LED Dimming Curve and 300mA LCD Bias Optimized for Advanced Panels San Jose, Calif. – Decemb…
12-17 22:00
Kinetic Technologies Announces Transient Voltage Suppression (TVS) Flat-Clamp Integrated Circuits for Port Protection Against High Voltage Surge and ESD Events
KTS1287: Up to ±250V Surge Protection for 20V SPR VBUS Components, KTS1289: Up to ±200V Surge Protection for 28V EPR VBUS Components, both Providing T…
11-24 22:00
Kinetic Technologies Launches Industry’s Most Comprehensive USB Type-C™ Port Protector for CC/SBU Data Lines and VBUS EPR Voltage Blocking
KTU1133: 48V Extended Power Range (EPR) USB Type-C/PD Port Protector IC Integrating VBUS Level Shift Circuit and Blocking NFET Gate Driver in 3x3mm Pa…
09-09 22:00
Kinetic Technologies™ Announces New Active-Clamp Current-Mode PWM Controller for Up to 80V Input, 200W Output
KTB2140: Optimized for High Efficiency, Supporting Full Range Power Over Ethernet (PoE) bt and 200W Telecom Applications San Jose, Calif. – March 11, …
03-11 21:00
Kinetic Technologies™ Announces Integrated Dual MOSFET Bridge Rectifier for Power over Ethernet up to 90W Input
KTA1170: Fully Compatible with IEEE ® 802.3bt Standard, Improves Powered Device Efficiency up to 2% San Jose, Calif. – March 11, 2025 – Power manageme…
03-11 21:00
Kinetic Technologies Introduces Novel OptiComp™ Frequency Control Method 2.4MHz, 3A Buck-Switching Regulator
KTB8400: Step-Down Regulator Features Fast Transient Response and Lowest Variation in Switching Frequency for Noise Sensitive Applications San Jose, C…
03-10 21:00
Kinetic Technologies™ Announces High-Efficiency 6A Step-down Voltage Regulator with I2C Interface
KTB8375: 4.5V – 24V Input Buck Regulator Combines Ultra-Fast Transient Response with High Efficiency San Jose, Calif. – March 10, 2025 – Kinetic Techn…
03-10 21:00